Two Sizes of Jetter for Two Kinds of Drains
Main sewer lines
That main line carries everything from inside the house out to the street. For these we’ll use our large jetter that runs up to 4 thousand PSI through either 1/2 inch or 3/4 inch hose. We access it through an outside cleanout, or sometimes through a vent on the roof.
Drains inside your home
Our smaller jetters use 1/4 inch and 3/8 inch hose at a lower pressure, so they’re great for sinks, tubs and floor drains. We do a lot of kitchen sinks, because food and grease from the garbage disposal coat the line, and if that line runs 20 feet or so without much slope before it reaches a bigger drain, all that sludge has nowhere to go.
Hydro Jetting vs. Snaking: Which One Does Your Drain Need?
A drain cable (also known as a snake or auger) cuts a hole through the clog so water can flow again. It doesn’t actually clean the pipe. A hydro jetter on the other hand scours the full pipe.
But neither method wins every time. “Ever situation is a little bit different,” Jordan says. Here’s how our techs will usually decide what to do:
Hair clog a few feet down a bathtub or shower drain? Cable will grab the clog and pull it out.
Kitchen line with built-up grease and food? Hydro jetting will solve the issue. Cabling will open it up but the line will likely plug again quickly.
Main sewer line has roots or sludge? Jetting cleans the full length and cuts roots away quickly.
A cable cleaning may keep the line clear for a year, while hydro jetting holds up longer, through the results depend on the pipe itself and what goes down it.
Ready to Stop Dealing with the Same Drain Problems?
Tired of calling plumbers every few months for clogs that keep coming back? Please complete the form below and we’ll get right back to you (usually same day M-F 8am-5pm). Need a faster response? Give us a call at 801-277-3342
"*" indicates required fields
Family-Owned Since 2002, Not a Franchise
Millcreek Plumbing is owned by two brothers- Dan and Jordan Beesley, and we’ve been family run since 2002. There are no corporate sales targets, and our techs don’t work on commission. What we recommend comes directly from what our camera finds in your line. So if we think a standard drain cleaning will solve the problem, that’s what we’ll say. If you do need jetting, we’ll explain it clearly and walk you through the price before we start work.
What Our Customers Say
Don’t just take our word for it. See what our satisfied customers say about working with Millcreek.
Frequently Asked Questions
Is hydro jetting safe for my pipes?
It’s definitely safe for pipes that are already in good condition, but keep in mind that not every drain cleaning tool is completely risk free. Older pipes are more common in Salt Lake City so our techs will check the line first, and we won’t jet a pipe that has cracks or breaks.
What’s the difference between hydro jetting and hydro scrubbing?
It’s the same service, just different names. It means cleaning a drain with high pressure water.
I heard you should hydro jet regularly. Is that true?
There’s no schedule that will fit every home and situation. It really depends on a few things like how old the house is, and what kind of problems you’re dealing with. If a drain keeps on clogging up, talk it through with us and we’ll set a plan for that line.
Can you diagnose and hydro jet in the same visit?
Most of the time we can. The tech who comes out will carry the camera, the cables and the jetting equipment. They’ll diagnose the problem, give you an estimate and do the work most times without needing to set a second appointment.
Should I try a chemical drain cleaner first?
We don’t recommend using chemical drain cleaners. They’re often just a short term fix, and dangerous if you accidentally come into contact with it.
Where does Millcreek Plumbing work?
We’ll bring our hydro-jetting equipment anywhere we work, which includes the Salt Lake Valley, Park City and Davis County.
Areas We Serve
See all areas we serve. Don’t see your town? Call us at (801) 277-3342 to confirm availability.